236-603/000-009/999-950 WAGO Terminal Blocks

WAGO 236-603/000-009/999-950 is a printed circuit connector with a short circuit breaking rating as per ATEX PTB 06 ATEX 1061 U / IECEx PTB 06.0042 U, rated voltage of 440V EN (Ex e II), and a rated current of 16A (Ex e II). It features 3 connection points, a total of 3 potentials, and 1 connection type across 1 level. The connector utilizes CAGE CLAMP technology for connection 1, requiring an operating tool for actuation. It accommodates solid and fine-stranded conductors ranging from 0.08 to 2.5mm2 (28 to 12 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules from 0.25 to 1.5mm2, specifically noting compatibility with 12 AWG THHN; THWN. The recommended strip length is 5 to 6mm (0.2 to 0.24 inches), with a conductor connection direction to PCB at 45 degrees and a pole number of 3. Physically, it has a pin spacing of 10/10.16mm (0.394/0.4 inches), a width of 32.3mm (1.272 inches), a height of 17mm (0.669 inches) with a height from the surface at 13mm (0.512 inches), and a depth of 14mm (0.551 inches). The solder pin length is 4mm, with dimensions of 0.7 x 0.7mm, and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. It features a THT PCB contact with an in-line solder pin arrangement and two solder pins per potential. The connector is light gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring and Electrolytic Copper (ECu) with tin plating for contacts. It has a fire load of 0.076MJ and weighs 4g. Designed to operate within a temperature range of -60 to +105°C, it complies with RoHS without exemptions. Packaged in boxes of 140 pieces, it has a GTIN of 4044918773164 and a customs tariff number of 85369010000, with its country of origin being CH.