2202-1611/1000-836 WAGO Terminal Blocks

Wago 2202-1611/1000-836 is a terminal designed for feed-through terminal block applications, featuring push-in CAGE CLAMP spring connections for efficient wire installation. It operates with a supply voltage of 230Vdc for its LED indicator and supports a rated current of 6.3A according to IEC and Ex e II standards, and 10A according to UL and CSA standards. This terminal is designed with a single deck, includes a fused-disconnect lever type with Normally Open (NO) auxiliary contacts suitable for 5x20mm fuses, and a blown-fuse LED indicator operating at 230Vdc. It also comes with a built-in end plate, ensuring the terminal is closed on both sides. The rated impulse voltage stands at 6 kV as per IEC standards. With a net width of 6.2 mm and designed for mounting on DIN-35 rails, this terminal accommodates 1 feed-through pole (1P). It is presented in gray with an orange actuator, measuring H66.1mm x W6.2mm x D57.6mm. Suitable for 0.25mm2 to 4mm2 fine stranded or solid conductors, and #22AWG to #12AWG fine stranded or solid conductors, with a 2.5mm2 nominal cross-section. The terminal is made from Polyamide (PA) 66 and allows a connection capacity of 2-wires (1 push-in + 1 push-in). It operates at a rated operating voltage of 250 V according to IEC, UL, and CSA standards, and 275 V according to Ex e II standards. This part belongs to the TOPJOB S series.